 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Cat.6 4 Pair UTP Cable Application: * * * * * * * * * Voice Fast Ethernet(IEEE802.3u) 100Vg-AnyLAN(IEEE 802.12) Token Ring(IEEE 802.5) TP-PMD(ANSI X3T9.5) 100Base-T Ethernet(IEEE 802.5) 155/622 Mbps 1.2/ 2.4 Gbps ATM 1000Base-T Ethernet 550 MHz Broadband Vedio Industry Standard: * * * * UL, C(UL), ETL Verified TIA/EIA 568B ISO/IEC 11801 EN 50173 Cable Data: * * * * * * * No. of Pairs:4 Jacket Color:Gray Insulation Thickness: 0.33mm Nom.O.D.:6.5mm Flame Rating:CM Package: Reel, 305m(1,000ft)/ box Transmission quality verified up to 250MHz Product Electrical Characteristics: * * * * Impedance:100 O 15 ohms Mutual Capacitance, max. nf/ 100m: 5.6 DC Resistance, max. Ohms/ 100m: 9.38 Capacitance Unbalance(Pair to Ground): 330pf/ 100m max. Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 200 250 Attenuation Max. dB/100M 2.0 3.8 6.0 7.6 8.5 10.7 15.5 19.9 29.2 33.0 NEXT dB/100m 74.3 65.3 59.3 56.2 54.8 51.9 47.4 44.3 39.8 38.3 Power Sum Minimum dB/100m 72.3 63.3 57.3 54.2 52.8 49.9 45.4 42.3 37.8 36.3 EFLEXT (dB/ 100m) 67.0 55.0 46.8 42.7 40.8 36.9 30.9 26.8 20.8 18.8 P/N * * * * Description Conductor:24AWG Bare Solid Copper Insulation:HDPE, FRPE, 100%FEP Ripcord:Under jacket (For Bare Solid Copper) Jacket:FRPVC 1101-04001 L A N 3 Cat.6 UTP Patch Cord Application: * * * * * * * * * Voice Fast Ethernet(IEEE802.3u) 100Vg-AnyLAN(IEEE 802.12) Token Ring(IEEE 802.5) TP-PMD(ANSI X3T9.5) 100Base-T Ethernet(IEEE 802.5) 155/622 Mbps 1.2/ 2.4 Gbps ATM 1000Base-T Ethernet 550 MHz Broadband Vedio Industry Standard: * * * * UL, C(UL), ETL Verified TIA/EIA 568B ISO/IEC 11801 EN 50173 1201-04002 Product Description: * * * * * * Molded boots prevent pin from bending and cables from kink Fully tested to meet EIA/ TIA-568B Category 6 requirements Category 6 stranded 24AWG wires provides maximum flexibility ETL verified to EIA/ TIA-568B specifications UL, C(UL) listed Wiring: T568B P/N 1201-04002 1201-04003 1201-04004 * Description Cat.6 4 Pair UTP Patch Cord, 2 meter (Gray color) Cat.6 4 Pair UTP Patch Cord, 3 meter (Gray color) Cat.6 4 Pair UTP Patch Cord, 5 meter (Gray color) For special requirements please contact with us 4 L A N Cat.6 Keystone Jack Industry Standard: * * * * * NEW Compliant Press fit IDC connector terminal for high frequency application UL, C(UL) listed Meets FCC parts 68 ANSI/TIA/ EIA-568B ISO/IEC 11801 ETL verified EIA/TIA T568B:Cat.6 channel link transmission performance Physicals: * * * * IDC connector accept 22-26 AWG solid wire Jack wiring:50 u" gold plated over 100 u" nickel Housing:High impact flame retardant plastic UL94V-0 rated IDC connector suitable for 110 punch down and Krone tool 1305-04003 Mechanical: * * Plug insertion life:750 cycle min. Plug retention force:30 lbs min. IDC connector with large spacer of each pair to improve crosstalk Electrical: * * * * * Current rating:1.5 Amps Insulation resistance:500Mega-ohms min. Contact resistance:20 Milli-ohms max. DC resistance:0.1 ohms max. Data transmission rates up to 250Mbps 1305-04002 P/N 1305-04002 1305-04003 * Package: 100 pcs/ box Description Cat.6 110/ Krone right-angle (90) Keystone Jack, T568A/ B Cat.6 110/ Krone vertical (180) Keystone Jack, T568A/ B L A N 5 Cat.6 Unshielded Patch Panel 110 Enhanced Cat.6 Patch Panel: * * * * * * NEW High performance, exceed EIA/ TIA 568B Category 6 channel link requirements 110 and Krone dual type IDC termination 19" 24 port patch panel, 1U size & 48 port panel, 2U size Accepts 22-26 AWG, stranded or solid wire Wiring:T568A/ B Optional rear cable management 1499-00001 1402-04001 High-low contact design to improve transmission performance P/N 1402-04001 1402-04003 1499-00001 IDC connector with large spacer of each pair to improve crosstalk Description Compliant Press fit IDC connector terminal for high frequency application Cat.6 19" 110/ krone dual type Patch Panel 24 ports, 1U size Cat.6 19" 110/ krone dual type Patch Panel 48 ports, 2U size 19" Rear cable management 6 L A N Cat.6 110 Cross-Connect Block & Panel w/Mounting legs 50 pair: 1801-01003 100 pair: 1801-02004 1803-02003 w/o Mounting legs 50 pair: 1802-01005 100 pair: 1802-02002 * * * * * Labels are placed on top of label holders. Exceeds TIA/EIA 568 Category 6 performance specifications Terminates 22 AWG through 26 AWG solid or stranded wire Wiring blocks and connecting blocks sold separately 19" Cross-Connect Panel make terminatins from the front Connecting blocks 4 pair: 1804-03002 5 pair: 1804-04001 Cat.6 110 to RJ-45(110) Patch Cord * * * * * Make quick, simple 110-bolck connections Category 6 stranded cable, colored pvc jacket 110 to RJ-45 type to convert one channel on a 110 block to a modular jack 110 to 110 type to link two 110 blocks Wiring: T568B(110 to RJ-45 type), straight-through (110 to 110 type) 110 to RJ-45 type 1202-04001 110 to 110 type 1203-04001 P/N 1801-01003 1801-02004 1802-01005 1802-02002 1804-03002 1804-04001 1803-02003 1202-04001 1203-04001 Description Wiring blocks w/Mounting legs, w/ label holder, w/ o connecting blocks, 50pair Wiring blocks w/Mounting legs, w/ label holder, w/ o connecting blocks,100pair Wiring blocks w/o mounting legs, w/ label holder, w/ o connecting blocks,50pair Wiring blocks w/o mounting legs, w/ label holder, w/ o connecting blocks,100pair Cat.6 Connecting blocks, 4pair (100 pcs/ bag) Cat.6 Connecting blocks, 5pair (100 pcs/ bag) Cat.6 19" cross-connect panel, 100pair Cat.6 Patch cord T568B(110 to RJ-45 type), 3meter Cat.6 Patch cord T568B(110 to 110 type), 3 meter L A N 7 110 Cross-Connect Block Installation Step Step 1: Mount the wiring base and legs onto a suitable mounting surface with the necessary screws and hardware. Then lace the cables through the appropriate openings in the wiring base. Step 2: Strip off the cable jacket with the jacket stripped tool. Step 3: Seating the wire in accordance with the wiring schemes (see page No.57 to page No.58) onto the wiring base. Step 4: Seating the conductors and trim off the excess wire with the cutting edge of the impact tool. Step 5: Insert an 4 pair or 5 pair of 110 connecting block into the head of the impact tool. Step 6: seating the 110 connecting block with the impact tool onto the wiring base. 8 L A N |
Price & Availability of CAT6
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |